org.apache.geronimo.kernel.config
Interface ConfigurationManager

All Known Subinterfaces:

EditableConfigurationManager

All Known Implementing Classes:

DeploymentConfigurationManager, EditableKernelConfigurationManager, KernelConfigurationManager, SimpleConfigurationManager

public interface ConfigurationManager

Encapsulates logic for dealing with configurations. Configurations have a lifecycle with three states: installed, loaded, and running. Installed means that the configuration is present in the server's repository. Loaded means that the Configuration GBean (including the configuration's ClassLoader) is running. Running means that all the GBeans in the Configuration are running. From a user perspective, there's not much difference between installed and loaded if the configuration has not been started (it still shows up as not running). However, certain operations will cause a configuration to be loaded but not started. For example, if ModuleA depends on ModuleB, then when ModuleA is distributed ModuleB will normally be loaded (to fire up the ClassLoader and validate ModuleA). But ModuleB will not be started at that point. It can be started manually or it will be started automatically when ModuleA is started. When a Configuration is not loaded, only its ConfigurationData is available for inspection. It's normally not possible to inspect the GBeans in the configuration because there's no ClassLoader that could be used to load the classes needed by the GBeanDatas in the configuration. Once the configuration has been loaded, it's ClassLoader is available so the GBeanDatas can be loaded and inspected. But the GBean instances are not instantiated and started until the configuration is started.

Method Summary

ArtifactResolver	getArtifactResolver() Gets the common ArtifactResolver in case the caller wants to use this directly.
Configuration	getConfiguration(Artifact configurationId) Gets a loaded Configuration (does not see unloaded configurations).
Artifact[]	getInstalled(Artifact query) Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances installed into the server environment.
Artifact[]	getLoaded(Artifact query) Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances loaded.
Artifact[]	getRunning(Artifact query) Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances running.
ConfigurationStore	getStoreForConfiguration(Artifact configuration) Gets the configuration store responsible for the specified configuration, or null if there is none.
ConfigurationStore[]	getStores() Get all the ConfigurationStores known to this manager at present
boolean	isConfiguration(Artifact artifact) Is the specified artifact a configuration?
boolean	isInstalled(Artifact configurationId) Is the specified configuration installed into the server environment?
boolean	isLoaded(Artifact configurationId) Is the specified configuration loaded into the kernel?
boolean	isOnline() Online means full functionality.
boolean	isRunning(Artifact configurationId) Is the specified configuation running?
List	listConfigurations() Gets a List>ConfigurationInfo< of every of every available configuation.
List	listConfigurations(AbstractName store) Return a list of the configurations in a specific store.
List	listStores() Return a list of the stores this manager knows about.
LifecycleResults	loadConfiguration(Artifact configurationId) Load the specified configuration (from a config store) and all configurations it depends on into the kernel.
LifecycleResults	loadConfiguration(Artifact configurationId, LifecycleMonitor monitor) Load the specified configuration (from a config store) and all configurations it depends on into the kernel.
LifecycleResults	loadConfiguration(ConfigurationData configurationData) Load the specified configurationData and all configurations it depends on (from a config store) into the kernel.
LifecycleResults	loadConfiguration(ConfigurationData configurationData, LifecycleMonitor monitor) Load the specified configurationData and all configurations it depends on (from a config store) into the kernel.
LifecycleResults	reloadConfiguration(Artifact configurationId) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	reloadConfiguration(Artifact configurationId, LifecycleMonitor monitor) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	reloadConfiguration(Artifact configurationId, Version version) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	reloadConfiguration(Artifact configurationId, Version version, LifecycleMonitor monitor) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	reloadConfiguration(ConfigurationData configurationData) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	reloadConfiguration(ConfigurationData configurationData, LifecycleMonitor monitor) Reloads the specified configuration and all configurations that have a dependency on the specified configuration
LifecycleResults	restartConfiguration(Artifact configurationId) Restarts the specified configuration and all configurations that have a service dependency on the specified configuration
LifecycleResults	restartConfiguration(Artifact configurationId, LifecycleMonitor monitor) Restarts the specified configuration and all configurations that have a service dependency on the specified configuration
void	setOnline(boolean online)
LifecycleResults	startConfiguration(Artifact configurationId) Loads and starts all of the gbeans contained within the configuration.
LifecycleResults	startConfiguration(Artifact configurationId, LifecycleMonitor monitor) Loads and starts all of the gbeans contained within the configuration.
LifecycleResults	stopConfiguration(Artifact configurationId) Stop the gbeans contained within the configuration.
LifecycleResults	stopConfiguration(Artifact configurationId, LifecycleMonitor monitor) Stop the gbeans contained within the configuration.
void	uninstallConfiguration(Artifact configurationId) Unstalls the specified configuration from the server.
LifecycleResults	unloadConfiguration(Artifact configurationId) Stops and unloads the configuration.
LifecycleResults	unloadConfiguration(Artifact configurationId, LifecycleMonitor monitor) Stops and unloads the configuration.

Method Detail

isInstalled

boolean isInstalled(Artifact configurationId)

Is the specified configuration installed into the server environment? That is, does it exist in the configuration store, regardless of whether it's loaded or running? Note that this always returns false if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

true if the configuration has been loaded; false otherwise

isLoaded

boolean isLoaded(Artifact configurationId)

Is the specified configuration loaded into the kernel? Note that this always returns false if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

true if the configuration has been loaded; false otherwise

isRunning

boolean isRunning(Artifact configurationId)

Is the specified configuation running? Note that this always returns false if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

true if the configuration is running, false otherwise

getInstalled

Artifact[] getInstalled(Artifact query)

Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances installed into the server environment. That is, are there any matches in the configuration store, regardless of whether they're loaded or running? Note that this always returns an empty array if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

query - The partially-complete artifact name to check for

Returns:

All matching artifacts that are loaded in the server

getLoaded

Artifact[] getLoaded(Artifact query)

Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances loaded. Note that this always returns an empty array if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

query - The partially-complete artifact name to check for

Returns:

All matching artifacts that are loaded in the server

getRunning

Artifact[] getRunning(Artifact query)

Given an artifact that's not fully resolved (e.g. some parts are missing), check whether there are any instances running. Note that this always returns an empty array if the argument does not represent a configuration (e.g. if it's for a plain JAR).

Parameters:

query - The partially-complete artifact name to check for

Returns:

All matching artifacts that are loaded in the server

listConfigurations

List listConfigurations()

Gets a List>ConfigurationInfo< of every of every available configuation. This includes all configurations installed, regardless of whether they are currently loaded or running.

listStores

List listStores()

Return a list of the stores this manager knows about.

Returns:

a List>AbstractName< of the stores this manager controls

getStores

ConfigurationStore[] getStores()

Get all the ConfigurationStores known to this manager at present

getStoreForConfiguration

ConfigurationStore getStoreForConfiguration(Artifact configuration)

Gets the configuration store responsible for the specified configuration, or null if there is none. The configuration need not be loaded or running; this just checks which store holds the data for it.

Parameters:

configuration - The unique ID for the configuration to check for, which must be fully resolved (isResolved() == true)

Returns:

The ConfigurationStore for this configuration, or null if the configuration was not found in any configuration store.

listConfigurations

List listConfigurations(AbstractName store)
                        throws NoSuchStoreException

Return a list of the configurations in a specific store.

Parameters:

store - the store to list

Returns:

a List>ConfigurationInfo< of all the configurations in the store

Throws:

NoSuchStoreException - if the store could not be located

isConfiguration

boolean isConfiguration(Artifact artifact)

Is the specified artifact a configuration?

Parameters:

artifact - the ID of the artifact to check, which must be fully resolved (isResolved() == true)

Returns:

true if the artifact is a configuration available in the server (regardless of whether it has been loaded/started)

getConfiguration

Configuration getConfiguration(Artifact configurationId)

Gets a loaded Configuration (does not see unloaded configurations).

Parameters:

configurationId - the unique ID of the configuration to get, which must be fully resolved (isResolved() == true)

Returns:

the specified configuration or null if the configuration has not been loaded

loadConfiguration

LifecycleResults loadConfiguration(Artifact configurationId)
                                   throws NoSuchConfigException,
                                          LifecycleException

Load the specified configuration (from a config store) and all configurations it depends on into the kernel. This causes the configuration gbean to be loaded and started, but does not load any of the gbeans contained within the configuration.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if no configuration with the given id exists in the configuration stores

LifecycleException - if there is a problem loading the configuration

loadConfiguration

LifecycleResults loadConfiguration(ConfigurationData configurationData)
                                   throws NoSuchConfigException,
                                          LifecycleException

Load the specified configurationData and all configurations it depends on (from a config store) into the kernel. This causes the configuration gbean to be loaded and started, but does not load any of the gbeans contained within the configuration.

Parameters:

configurationData - the configuration to load

Returns:

the results of the operation

Throws:

NoSuchConfigException - if no configuration with the given id exists in the configuration stores

LifecycleException - if there is a problem loading the configuration

loadConfiguration

LifecycleResults loadConfiguration(Artifact configurationId,
                                   LifecycleMonitor monitor)
                                   throws NoSuchConfigException,
                                          LifecycleException

Load the specified configuration (from a config store) and all configurations it depends on into the kernel. This causes the configuration gbean to be loaded and started, but does not load any of the gbeans contained within the configuration.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if no configuration with the given id exists in the configuration stores

LifecycleException - if there is a problem loading the configuration

loadConfiguration

LifecycleResults loadConfiguration(ConfigurationData configurationData,
                                   LifecycleMonitor monitor)
                                   throws NoSuchConfigException,
                                          LifecycleException

Load the specified configurationData and all configurations it depends on (from a config store) into the kernel. This causes the configuration gbean to be loaded and started, but does not load any of the gbeans contained within the configuration.

Parameters:

configurationData - the configuration to load

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if no configuration with the given id exists in the configuration stores

LifecycleException - if there is a problem loading the configuration

unloadConfiguration

LifecycleResults unloadConfiguration(Artifact configurationId)
                                     throws NoSuchConfigException

Stops and unloads the configuration. This causes all contained gbeans to be stopped and unloaded, and the configuration gbean is stopped and unloaded. This operation causes all configurations that have a class or service dependency on the specified configuration to be stopped and unloaded.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

unloadConfiguration

LifecycleResults unloadConfiguration(Artifact configurationId,
                                     LifecycleMonitor monitor)
                                     throws NoSuchConfigException

Stops and unloads the configuration. This causes all contained gbeans to be stopped and unloaded, and the configuration gbean is stopped and unloaded. This operation causes all configurations that have a class or service dependency on the specified configuration to be stopped and unloaded.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

startConfiguration

LifecycleResults startConfiguration(Artifact configurationId)
                                    throws NoSuchConfigException,
                                           LifecycleException

Loads and starts all of the gbeans contained within the configuration. If any of the gbeans fails to fully start, all gbeans will be unloaded and an exception will be thrown. This operation causes all configurations that the specified configuration has a service dependency on to be started.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException

startConfiguration

LifecycleResults startConfiguration(Artifact configurationId,
                                    LifecycleMonitor monitor)
                                    throws NoSuchConfigException,
                                           LifecycleException

Loads and starts all of the gbeans contained within the configuration. If any of the gbeans fails to fully start, all gbeans will be unloaded and an exception will be thrown. This operation causes all configurations that the specified configuration has a service dependency on to be started.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException

stopConfiguration

LifecycleResults stopConfiguration(Artifact configurationId)
                                   throws NoSuchConfigException

Stop the gbeans contained within the configuration. This operation causes all configurations that have a service dependency on the specified configuration to be stopped.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

stopConfiguration

LifecycleResults stopConfiguration(Artifact configurationId,
                                   LifecycleMonitor monitor)
                                   throws NoSuchConfigException

Stop the gbeans contained within the configuration. This operation causes all configurations that have a service dependency on the specified configuration to be stopped.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

restartConfiguration

LifecycleResults restartConfiguration(Artifact configurationId)
                                      throws NoSuchConfigException,
                                             LifecycleException

Restarts the specified configuration and all configurations that have a service dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

restartConfiguration

LifecycleResults restartConfiguration(Artifact configurationId,
                                      LifecycleMonitor monitor)
                                      throws NoSuchConfigException,
                                             LifecycleException

Restarts the specified configuration and all configurations that have a service dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(Artifact configurationId)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(Artifact configurationId,
                                     LifecycleMonitor monitor)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(Artifact configurationId,
                                     Version version)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

version - new version to load from the config store

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(Artifact configurationId,
                                     Version version,
                                     LifecycleMonitor monitor)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

monitor - the monitor that should receive events as the operation is carried out

version - new version to load from the config store

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(ConfigurationData configurationData)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationData - the configuration to load

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

reloadConfiguration

LifecycleResults reloadConfiguration(ConfigurationData configurationData,
                                     LifecycleMonitor monitor)
                                     throws NoSuchConfigException,
                                            LifecycleException

Reloads the specified configuration and all configurations that have a dependency on the specified configuration

Parameters:

configurationData - the configuration to load

monitor - the monitor that should receive events as the operation is carried out

Returns:

the results of the operation

Throws:

NoSuchConfigException - if the configuration is not loaded

LifecycleException - if there is a problem loading the configuration

uninstallConfiguration

void uninstallConfiguration(Artifact configurationId)
                            throws IOException,
                                   NoSuchConfigException

Unstalls the specified configuration from the server. This operation can not be reversed.

Parameters:

configurationId - the configuration identifier, which must be fully resolved (isResolved() == true)

Throws:

IOException - if there was a problem removing the configuration

NoSuchConfigException - if the configuration is not loaded

getArtifactResolver

ArtifactResolver getArtifactResolver()

Gets the common ArtifactResolver in case the caller wants to use this directly. It is configured for all the repositories known to this configuration manager, etc.

isOnline

boolean isOnline()

Online means full functionality. Offline typically means that configurations will never be started, although they may be marked in the persistent configuration list.

Returns:

online status of ConfigurationManager

setOnline

void setOnline(boolean online)